The ScanGauge currently has XGauges for Generation 2 (R-Series) and Generation 3 (F-Series) MINI’s.  Generation 3 MINI’s require a special ScanGauge firmware that’s available for special order.  The Generation 2 XGauges found on this page will work with any ScanGauge with firmware 4.42 or higher.

How do I check my ScanGauge's Firmware?

Firmware Check

From the Home Screen, push the lower right function button twice next to MORE. Next, use the upper left and right function buttons to cycle through the available options until you reach the screen titled Version.

Firmware Check – Post 4.0

From the Home Screen, push the lower right function button twice next to MORE. Next, use the upper left and right function buttons to cycle through the available options until you reach the screen titled Version.

sgii-check-firmware

Firmware Check – Pre 4.0

From the Home Screen, from the home screen and pressing MORE>MORE>MORE>VERSION

Which generation MINI do I have?

Generation 2

  • MINI Hatch (R56) 2007 – 2013
  • MINI Cabrio (R57) 2009 – 2015
  • MINI Coupe (R58) 2011 – 2015
  • MINI Roadster (R59) 2012 – 2015
  • MINI Countryman (R60) 2010 – 2016
  • MINI Paceman (R61) 2013 – 2016
  • MINI Clubman (R55) 2008 – 2014
  • MINI Clubvan (R55) 2012 – 2014

Generation 3

  • MINI Hatch (3 Door Hatchback) (F56) 2014 – Present
  • MINI Hatch (5 Door Hatchback) (F55) 2014 – Present
  • MINI Cabrio (F57) 2016 – Present
  • MINI Clubman (F54) 2014 – Present

Generation 2 MINI

XGauges for the R-Series Generation 2 MINI

Generation 3 MINI

XGauges for the F-Series Generation 3 MINI

BMW Testers

Become an XGauge tester for 2008+ BMW’s

MINI Generation 2 »

  • Gauge
  • TXD
  • RXF
  • RXD
  • MTH
  • Name
  • Notes
  • Oil Pressure (PSI)
  • 06F1122254EE
  • D562065437EE
  • 3810
  • 000100450000
  • OPR
  • 4.42 Required - 2011+ N18 Engine's Only
  • Gauge
  • TXD
  • RXF
  • RXD
  • MTH
  • Name
  • Notes
  • Gauge
  • TXD
  • RXF
  • RXD
  • MTH
  • Name
  • Notes
  • Gauge
  • TXD
  • RXF
  • RXD
  • MTH
  • Name
  • Notes
  • Gauge
  • TXD
  • RXF
  • RXD
  • MTH
  • Name
  • Notes
  • Gauge
  • TXD
  • RXF
  • RXD
  • MTH
  • Name
  • Notes

Generation 3 MINI’s

The ScanGauge requires a special firmware for XGauges to work on Generation 3 F-Series MINI’s.  This special firmware is 4.51G3, and it comes pre-programmed to monitor the following additional MINI specific parameters

  • Engine Oil Temperature
  • Engine Oil Pressure
  • Fuel Tank Level (Gallons)
  • Fuel Temperature
  • Fuel Rail Pressure
  • Electric Fan Duty Cycle
  • Air to Fuel Ratio
  • Transmission Fluid Temperature 1 (Automatic Transmissions Only)
  • Transmission Fluid Temperature 2 (Automatic Transmissions Only)
  • Transmission Input Speed (Automatic Transmissions Only)
  • Transmission Output Speed (Automatic Transmissions Only)
  • Torque (Automatic Transmissions Only)

If you’re interested in purchasing a ScanGauge with this special firmware or upgrading your current ScanGauge to this special firmware please use the form below to contact us or call 1-888-433-5664.