•  

Upgrade

Upgrade Your Older ScanGaugeII

The most recent software revision was version 4.02. To check the firmware version of your ScanGaugeII, use the diagrams shown below.

From the Home Screen, push the lower right function button twice next to MORE. Next, use the upper left and right function buttons to cycle through the available options until you reach the screen titled Version.

Firmware Check - Post 4.0

From the Home Screen, from the home screen and pressing MORE>MORE>MORE>VERSION

Firmware Check - pre 4.0

Version 4.02 was the first release with the updated menu system and performance monitoring.

Upgrade your ScanGauge for free if it was purchased on or after January 1st, 2011 and you do not have at least version 4.02

The cost to upgrade if yours was purchased before January 1st, 2011 is $25 (USD)

There will be a new manual and quick start guide included with every upgrade

Return shipping to you will be provided by US Post Office and this cost is included in the $25 (USD)

Please only send the ScanGaugeII unit in, do not send the cable or original packaging.

Current turnaround time is about 1 week, this does not include shipping time.

 

For upgrades you need to:

  1. Download and print the upgrade form -  ScanGaugeII Upgrade Form - 1.1
  2. Enter all information (only put CC info if needed)
  3. Mail the form, and the ScanGaugeII unit to:Linear Logic
    2222 S. Dobson Rd.
    Ste 801,
    Mesa, AZ 85202

 

 

 

  •  

  • Need Some Help?

    1-888-433-5664

    Mon - Fri, 8am to 4pm, MST