Displaying Trip Value as a Gauge (page 28 of the manual)

You can take any of the trip values and have them displayed as a gauge.

This allows you to monitor trip functions along with other gauge functions.

• To start, from the HOME screen use MORE>MORE>MORE>XGAUGE
• Then in the top right select the number of the XGauge memory you want to use (0 to 24)
• Press EDIT, In the TXD screen, the first character determines which trip function will be displayed. The second character determines which trip to use.
• After you have made your choice press OK>
• On the RXF screen that will come up next make the first character an 8, this tells the ScanGauge that the gauge you are creating is to be used as a trip gauge. All values after the 8 are ignored.
• Now press OK> until you reach the name screen and enter a name. For example, TDT for Time Driven Today
• Lastly press SAVE.

Now you can select your new gauge just like any other one. From the home screen, press GAUGE press the button next to the gauge you want to use for the XGauge. Keep pressing as needed until your newly created XGauge name appears.