Displaying Horsepower as a Gauge

You can have Horsepower read out on your ScanGauge as you drive.

• To start, from the HOME screen use MORE>MORE>MORE>XGAUGE
• Then in the top right select the number of the XGauge memory you want to use (0 to 24)
• Next <EDIT this will take you to the TXD screen
• Using the buttons next to + and - after each character the -> in the top right will move to the next character space.
• Enter 00 into the TXD screen and press OK> You will be taken to RXF
• Enter 400080000000 and press OK> you will be take to RXD
• Enter 0000 and press OK> you will be taken to MTH (math)
• Enter 000A00170000 and press OK> you will be taken to NAME
• You can enter whatever name you would like up to 3 characters, when you are finished press OK>
• Lastly press SAVE.

Now you can select your new gauge just like any other one. From the home screen, press GAUGE press the button next to the gauge you want to use for the XGauge. Keep pressing as needed until your newly created XGauge name appears.